Started by
Sweddy
on
Topic category: General discussion
I need a block to change into another block but only if it's currently touching another specific block.
Help plz.
Topic category: General discussion
I need a block to change into another block but only if it's currently touching another specific block.
Help plz.
First set the random tick speed to 1,
Next add a stacked event for the random tick event,
Then press add event and select stacked event again,
Select "test for block at I J K" (conditions bar) and press add event
After that go to the conditions bar (top) and select "When block at
I J K == block" and select the block you want to activate the event
Last step: Press ok/done (3 times).
I'm sorry, i forgot to tell you that the last event you add needs to be "add block" and not stacked event again.
That means that when you need to select
"When block at I J K == block"
You will first need to select "add block" event.
@#1
There are no "when block at" or "test for block at" options in the conditions bar.
@#2 there is still no "when block at" or "test for block at" condition
@#2.1
@#2.1.1 when block at I J K == item/block
@#2.1.1.1
It doesn't work.
I changed it to check for a diamond block at j-1. Or should it be j - 1?
I only wanted to test it so I decided to give it a "spawn gem" effect at j+1 but nothing happened.
"A New Beginning"
I started playing minecraft again!!!!!!!!