Started by
Supernoob66
on
Topic category: User side tutorials
I created a procedure for the 3x3x3 hammer you can configure the area of hammer
but you can configure the blocks that are not breaking
The procedure http://www.mediafire.com/file/c6cbky7ca7w4xoa/procedure_hammer_compact_configurable.ptpl/file
In procedure editor click on the button "importe procedure" and select the procedure you downloaded
I was inspired by this tutorial: https://mcreator.net/forum/47084/how-create-hammer-3x3x3
I have made tutorial vidéo for this procedure https://www.youtube.com/watch?v=9PZa9l81_P8
Edited by Supernoob66 on Wed, 05/22/2019 - 22:23
Nice to see this :)
Nice, but Loic_MaitreDuFeu and me have succedded to created a hammer 3x3x1.
this procedure allows to create a hammer 5x5x5, 3x10x3, 100x100x100 or 1,000,000x1.000.000x1.000.000 one can create any size without adding blocks to the precedure just by changing some number
Really?
yes i use this for place block on a big zone
https://cdn.discordapp.com/attachments/407211731790856192/564139385566789633/unknown.png
*area
This is so cool! I have been wanting to do something like this but am bad at procedures.
Thanks!
lots of errors